CN

Stock Code:800328

QINGDAO JIAEN SEMICONDUCTOR CO., LTD

  • How to identify electronic components on circuit boards
    2022.08.10

    How to identify electronic components on circuit boards

    The shape recognition of electronic components is to correspond to the physical object and the name. The purpose is to get an electronic component to know what it is and its circuit graphic symbol.

    VIEW MORE+
  • IGBT power modules in automotive applications
    2022.08.06

    IGBT power modules in automotive applications

    Environmental conditions such as high ambient temperature, exposure to mechanical shock, and specific drive cycles require special attention to the mechanical and electrical characteristics of IGBT power modules to ensure that their performance is fully developed and maintained throughout its service life. High reliability. This article discusses the power and thermal cycling of IGBTs.

    VIEW MORE+
  • Fault characteristics of electronic components
    2022.07.23

    Fault characteristics of electronic components

    First, the failure characteristics of electronic components

    VIEW MORE+
  • What parameters should be attentioned when replacing capacitors
    2022.07.16

    What parameters should be attentioned when replacing capacitors

    Among components, capacitors can be said to be components with complex types and specifications, especially in order to adapt to different circuits and different working environments, even capacitors with the same capacity and rated voltage have various types and material characteristics. s Choice. If a capacitor fails, the usual solution is to replace it with a new capacitor of the same size. But what if I can't find a capacitor of the same specification

    VIEW MORE+
  • Soldering requirements for electronic components
    2022.07.02

    Soldering requirements for electronic components

    Install the resistor in the specified position according to the diagram. The mark is required to be upward and the word direction is consistent. After installing the same specification, install another specification, and try to make the resistors as high and low as possible. After soldering, cut off the excess pins exposed on the surface of the printed circuit board.

    VIEW MORE+
  • Thermal Conditions in Electronics - Steady State Analysis
    2022.06.24

    Thermal Conditions in Electronics - Steady State Analysis

    In the field of electronics, especially in the field of PCBA, thermal conditions are critical to the life cycle, performance and function of the device. Environmental conditions often affect how designers lay out their components on a PCB.

    VIEW MORE+

+86 13792436358